Filament Drying Guide & Timer

Wet filament causes stringing, bubbling, rough surfaces, and weak layer bonds. Select your material to see recommended drying parameters — then start the built-in timer so you don't forget about it.

Select your filament
PLA
Temp45°C
Time4 hrs
Target humidity<15%
PETG
Temp65°C
Time4 hrs
Target humidity<15%
ABS
Temp80°C
Time4 hrs
Target humidity<15%
ASA
Temp80°C
Time4 hrs
Target humidity<15%
TPU
Temp50°C
Time4 hrs
Target humidity<15%
Nylon
Temp80°C
Time12 hrs
Target humidity<10%
PC
Temp80°C
Time6 hrs
Target humidity<10%
Select a material above to load the timer
--:--:--
hours : minutes : seconds
Set a custom drying time